Monorail PCB [Pre-Order]
This is for a PCB ONLY, no case or plate.
JST connectors are not included.
3mm Red LED indicators are included, but not soldered.
These PCBs will be BLACK with White silkscreen. Pictured are the green prototypes, and are not indicative of the final revision.
Monorail is a series of Minivan-compatible MX hot-swap PCBs that feature a break-away half-numrow to fit in V4N4G0N cases. See these links for a history lesson:
These PCBs are compatible with V4N4G0N and (most) Minivan cases. Snap off the top numrow to fit the board in Minivan cases.
See the Minivan Case compatibility matrix to see which cases may not work. If your case is not listed here, then it is fully compatible with the Monorail PCBs.
The PCBs support the standard van tray-mount locations, and sport twelve (12) addressable RGB LEDs for underglow.
The USB port on the right side can be snapped off for Vanagon case compatibility, and there is a JST connector footprint for a Universal Daughterboard. The half-numrow has all of the necessary connections broken out to through-hole pads, so you can electrically re-connect the row if unintentionally severed. (You can also break this row off and wire it to your own PM or similar for a little macropad)
This Pre-Order is for the production run of in-stock boards. These will be black with white silkscreen, and a HASL finish on the exposed copper.
There are 3 layout options, each is a separate PCB:
Here is a KLE of the layouts
Monorail Diesel: OG Minivan, Southpaw, and Arrows
Monorail Jet: Jetvan/Minisub
Monorail Steam: FT (1u WKL / 1.25u HHKB), m3n3vn, and a new 125-100-125-275-300-125-100-125 "symmetrical" layout
Monorail Steam is pictured. Note that there will be interference with one of the 1.25u hotswap sockets in tray mount cases when using the Steam layout. The offending socket is labeled in the KLE and on the PCB Wiki. You may omit this socket (and the subsequent layouts) or use a case that does not have a tray mount point at that location. This limitation does not apply to the Diesel and Jet layouts.
The PCBs are pre-flashed with Vial firmware. Firmware source, pre-compiled .hex, and plate .dxf's are available on Github. https://github.com/KiserDesigns/Monorail
Expected Ship Date: July 2022